|
|
| |
|
| |
|
| |
| |
|
UN-INS001 |
| |
 |
| 1.
|
Push-on
the banjo end, inserts or straight connector
onto the hose with the bushing in place. |
|
|
|
 |
| 2.
|
Place
above assembly onto the end press as shown
in the diagram. |
|
|
 |
| 3.
|
Tighten
the clamp and rotate insertion slowly until
the fittings is fully inserted. (Be sure
that the hose is not push back while the
insertion is being rotated.) |
|
|
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
